Firewall logs reveal a lot of information on the nature of traffic coming in and going out of the firewall, allows you to plan your bandwidth requirement based on the bandwidth usage accross the firewalls. Analyzing these firewall traffic logs is vital to understand network and bandwidth usage and plays an important role in business risk assessment.

NetScreen Firewall Log Analysis..
Reports of NetScreen100 logs..

LogQuest VF can verify, analyze and generate report for NetScreen Firewall logs. You need to collect Netscreen firewall device logs and then verify in LogQuest VF.

Report based on the file: FireWall Logs/5.Juniper Networks/NetScreen/NetScreen100/firelog_100/firelog_100_20050623.log
Pre-defined Log Format: Juniper Network/NetScreen_100
Date report was created: 25th October 2007

a)Report Conditions are:
Condition(1)=Data: *,Column: Col1,Logic: Contain, Rule: Count,Mode: Single
Condition(2)=Data: *,Column: Col18,Logic: Contain,Rule: Count,Mode: Single
Condition(3)=Data: system-notification-00257(traffic):,Column: Col4,Logic: Contain,Rule: Count,Mode: Single
Condition(4)=Data: start_time="2005-06-23,Column: Col5, Logic: Contain,Rule: Count,Mode: Single

b)Report Conditions are:
Condition(1)=Data: *,Column: Col18,Logic: Contain, Rule: Count,Mode: Single
Condition(2)=Data: *,Column: Col20,Logic: Contain,Rule: Count,Mode: Single
Condition(3)=Data: ,Column: Col24, Logic: Contain,Rule: Total Sum,Mode: Single
Condition(4)=Data: , Column: Col1,Logic: Contain,Rule: Total Sum,Mode: Single
Condition(5)=Data: ,Column: Col6,Logic: Contain,Rule: Total Sum,Mode: Single

c)Report Conditions are:
Condition(1)=Data: *,Column: Col18,Logic: Contain,Rule: Count,Mode: Single
Condition(2)=Data: *,Column: Col19,Logic: Contain, Rule: Count,Mode: Single
Condition(3)=Data: ,Column: Col2,Logic: Contain,Rule: Total Sum,Mode: Single
Condition(4)=Data: ,Column: Col9,Logic: Contain,Rule: Total Sum,Mode: Single
Condition(5)=Data: , Column: Col10,Logic: Contain,Rule: Total Sum,Mode: Single

NetScreen Firewall Log Analysis..
Reports of NetScreen500 logs..

LogQuest VF can verify, analyze and generate report for NetScreen Firewall logs. You need to collect Netscreen firewall device logs and then verify in LogQuest VF.

Report based on the file: FireWall Logs/5.Juniper Networks/NetScreen/NetScreen500/netscreen.log
Pre-defined Log Format: Juniper Network/NetScreen_500
Date report was created: 26th October 2007

a)Report Conditions are:
Condition(1)=Data: fw="ns500",Column: Col9,Logic: Contain,Rule: Count,Mode: Single
Condition(2)=Data: 17:07:21",Column: Col8,Logic: Contain, Rule: Count,Mode: Single
Condition(3)=Data: ip=218.236.85.126, Column: Col3,Logic: Contain,Rule: Count,Mode: Single
Condition(4)= Data: <191>id=firewall,Column: Col6,Logic: Contain,Rule: Count,Mode: Single
Condition(5)=Data: *,Column: Col12,Logic: Contain,Rule: Count,Mode: Single

b)Report Conditions are:
Condition(1)=Data: <192>id=firewall,Column: id,Logic: Contain,Rule: Count, Mode: Single
Condition(2)=Data: ip=218.236.85.126,Column:Col3_IP1 Logic:Contain,Rule:Count,Mode:Single
Condition(3)=Data: fw="ns500",Column:Col9,Logic: Contain,Rule: Count,Mode: Single
Condition(4)=Data: *,Column: Col1_rules,Logic: Contain,Rule: Count,Mode: Single,
Condition(5)=Data: *,Column: sent and rcvd,Logic: Contain, Rule: Count,Mode: Single

c)Report Conditions are:
Condition(1)=Data: *,Column: Col14,Logic: Contain,Rule: Count,Mode: Single
Condition(2)=Data: *,Column: Col15,Logic: Contain,Rule: Count,Mode: Single
Condition(3)=Data: ,Column: sent and rcvd,Logic: Contain, Rule: Total Sum,Mode: Single
Condition(4)=Data: ,Column: Col17, Logic: Contain,Rule: Total Sum,Mode: Single
Condition(5)=Data: , Column: Col19,Logic: Contain,Rule: Total Sum,Mode: Single